UPHOSTERY CLEANING

Ron's 10 Step Upholstery Cleaning

1. Pre-Inspection - Our service technician will inspect the upholstery, noting fabric type and soiling conditions. He will also advise you of any possible permanent staining.

2. Pre-Vacuum - Your upholstery will be thoroughly vacuumed to remove dry soil. Removing dry soil is one of the most important steps in cleaning.

3. Floor Protection - Your carpet or wood floors will be protected with an absorbent material to ensure we do not drip or over spray as we clean the upholstery.

4. Pre-Spray and Pre-Spot - The fabric is pre-sprayed with special cleaning compounds especially designed for your particular fabric & soil condition. This loosens up the soil to make rinsing more effective.

5. Pre-Agitate - The pre-spray will be worked into the fabric with a white towel or a horsehair brush especially designed for this use.

6. Rinse & Extract - Once the soil has been loosened, we will thoroughly flush the fabric with our specially designed upholstery extraction tools. This step sanitizes & deodorizes the fabric. Water pressure is regulated so that fabric is not over wet.

7. Neutralize - Every piece that we clean is pH balanced so there is no sticky left behind. This treatment is applied as a rinse thru the machine or is applied after rinsing depending on soil conditions.

8. Post Spot Treatment - If any spots are not removed during the cleaning process, specialty-spotting techniques are applied.

9. Post-Grooming - If fabric has a knap, the knap is set in one direction using a grooming brush or white towel.

10. Post-Inspection - Piece is inspected by the technician and then by the homeowner during our post inspection. The customer will let us know that they are pleased by signing our invoice.